User Tools

Site Tools


ubuntu:hardware:sensors

Ubuntu - Hardware - sensors

lm_sensors is a set of hardware monitoring user space utilities.

They are helpful for tracking temperature, fan, and voltage data.


Requirements

Kernel

I2C support is needed along with the following kernel options:

KERNEL Enable I2C_CHARDEV and hardware Monitoring support in the kernel
 
Device Drivers  --->
    -*- I2C support  --->
        <*>   I2C device interface
    <*> Hardware Monitoring support  --->
 
        Select a driver, e.g.:
        [*] Intel Core/Core2/Atom temperature sensor (coretemp)

sensors-detect

sensors-detect (/usr/sbin/sensors-detect) can be used to find available sensors and associated kernel modules:

sudo sensors-detect

NOTE: Follow the instructions.

  • It will probe which sensors are available and load the relevant kernel modules.
  • The final question will allow you to write a config file in /etc/modules-load.d that contains the kernel modules that need to be loaded.
    • This will only work if the modules-load runscript is started, add it to the default runlevel if necessary.
  • If you use /etc/conf.d/modules to declare which kernel modules to load simply add the necessary kernel modules as shown by sensors-detect to it.

sensors

sensors

returns:

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +52.2°C  
Tccd1:        +40.8°C  
Tccd2:        +41.8°C  
 
enp4s0-pci-0400
Adapter: PCI adapter
PHY Temperature:  +59.9°C  
MAC Temperature:  +59.4°C  
 
acpitz-acpi-0
Adapter: ACPI interface
temp1:        +16.8°C  (crit = +20.8°C)
 
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:        +42.0°C  
 
amdgpu-pci-0c00
Adapter: PCI adapter
vddgfx:      421.00 mV 
fan1:          89 RPM  (min =    0 RPM, max = 3000 RPM)
edge:         +46.0°C  (crit = +100.0°C, hyst = -273.1°C)
                       (emerg = +105.0°C)
junction:     +52.0°C  (crit = +110.0°C, hyst = -273.1°C)
                       (emerg = +115.0°C)
mem:          +60.0°C  (crit = +108.0°C, hyst = -273.1°C)
                       (emerg = +113.0°C)
PPT:          23.00 W  (cap = 303.00 W)
 
nvme-pci-0100
Adapter: PCI adapter
Composite:    +39.9°C  (low  = -273.1°C, high = +81.8°C)
                       (crit = +84.8°C)
Sensor 1:     +39.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +46.9°C  (low  = -273.1°C, high = +65261.8°C)
ubuntu/hardware/sensors.txt · Last modified: 2023/06/03 11:52 by peter

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki