This is an old revision of the document!

Ubiquiti - CLI - Cheat Sheet

Commands that can be run on Unifi devices from the command line.

Command	Description	Example
info	Display AP information.	info
fwupdate	Update firmware.	fwupdate --url https://<firmware-url>.bin
poweroff	Shutdown the device.	poweroff
reboot	Reboot the device.	reboot
set-default	Restore to factory default.	set-default
set-inform <inform_url>	Set URL of the controller.	set-inform http://ip-of-controller:8080/inform
set-inform <inform_url>	The Set-Inform URL tells the Unifi Access Point where the controller is located. By default, the access point will search the network for the controller, using the default DNS name unifi. This does not always work, so we need to tell the access point the correct address of the Unifi Controller.	set-inform http://192.168.1.10:8080/inform
upgrade <firmware_url>	Upgrade firmware.	upgrade http://192.168.1.10/unifi_fw.bin
uptime	Displays the device uptime.	uptime

Unifi OS SSH Commands

Commands that can be run for Controllers running Unifi OS.

Command	Description	Example
ubnt-device-info summary	Show system information.	ubnt-device-info summary
ubnt-systool cputemp	Show CPU Temp.	ubnt-systool cputemp
ubnt-systool cpuload	Show CPU load.	ubnt-systool cpuload
ubnt-systool hostname	Set new hostname.	ubnt-systool hostname <newname>
ubnt-systool portstatus	Show port status.	ubnt-systool portstatus
ubnt-systool poweroff	Shutdown device.	ubnt-systool poweroff
ubnt-systool reboot	Reboot device.	ubnt-systool reboot
ubnt-systool reset2defaults	Factory reset device.	ubnt-systool reset2defaults
ubnt-tools ubnt-discover	Show Unifi devices in the network.	ubnt-tools ubnt-discover
cat /mnt/data/udapi-config/dnsmasq.lease	Show DHCP Leases.	cat /mnt/data/udapi-config/dnsmasq.lease
cat /mnt/data/udapi-config/unifi	Show configuration.	cat /mnt/data/udapi-config/unifi
/etc/init.d/S95unifios restart	Restart Unifi OS Web interface	/etc/init.d/S95unifios restart