ubiquiti:access_point_not_showing_up_in_pending_devices
This is an old revision of the document!
Table of Contents
Ubiquiti - Access Point not showing up in pending devices
SSH into AP
Run:
ssh admin@192.168.1.18 admin@192.168.1.18's password:
returns
BusyBox v1.25.1 () built-in shell (ash)
___ ___ .__________.__
| | |____ |__\_ ____/__|
| | / \| || __) | | (c) 2010-2020
| | | | \ || \ | | Ubiquiti Networks, Inc.
|______|___| /__||__/ |__|
|_/ https://www.ui.com/
Welcome to UniFi UAP-AC-Mesh-Pro!
ACMeshPro1-BZ.v4.3.20#
Get Information
info
returns:
Model: UAP-AC-Mesh-Pro Version: 4.3.20.11298 MAC Address: 78:8a:20:b0:7f:9c IP Address: 192.168.1.18 Hostname: ACMeshPro1 Uptime: 232876 seconds Status: Connected (http://192.168.1.10:8080/inform)
NOTE: The Status line at the bottom may indicate something like:
Status: Not Adopted (http://192.168.1.10:8080/inform)
In this case, you may want to try the options below.
Inform Cloudkey to Adopt
- Where the ip.address.of.cloudkey is either a private address if it is local or the public address if it is remote.
returns:
Adoption request sent to 'http://ip.address.of.cloudkey:8080/inform'. Use the Controller to complete the adopt process.
Get Information Again
info
and check if the Status line shows this is adopted.
If adopted then all done, otherwise try the rest of the statements below…
ubiquiti/access_point_not_showing_up_in_pending_devices.1603098876.txt.gz · Last modified: 2020/10/19 09:14 by 192.168.1.1