Docker - Media Server - Sonarr - Configure Download Clients

Navigate to Settings → Download Clients.

In Download Clients:

• Click on the Plus button.

Click on one of the buttons to add that type of Download Client:

• If adding a Download Client that supports the Usenet click on the Usenet buttons.
• If adding a Download Client , click one of the Torrents buttons

• Name: SABnzbd.
• Enable: Checked.
• Host: 172.19.0.38. This is the ipv4_address as defined for SABnzbd in the Dockerfile.
• Port: 8080: This is the Port as defined for SABnzbd in the Dockerfile.
• Url Base: <blank>.
• API Key: Get the API Key from the Security section of SABnzbd. For this setup, go to SABnzbd.
• Username: <blank>.
• Password: <blank>.
• Category: tv.
• Recent Priority: Default.
• Older Priority: Default.
• Use SSL: Not Checked.
• Client Priority: 1. This is set to 1, as the top priority Usenet Download Client.
• Click Save.

Click on the Test button at the bottom:

During the test, the button will change as:

If successful, the button will show:

• Name: NZBGet.
• Enable: Checked.
• Host: 172.19.0.37. This is the ipv4_address as defined for NZBGet in the Dockerfile.
• Port: 6789: This is the Port as defined for NZBGet in the Dockerfile.
• Url Base: <blank>.
• Username: nzbget.
• Password: tegbzn6789.
• Category: Series.
• Recent Priority: Normal.
• Older Priority: Normal.
• Add Paused: Not Checked.
• Use SSL: Not Checked.
• Client Priority: 2. This is set to 2, as I prefer SABnzbd to which I have set this as 1.
• Click Save.

Click on the Test button at the bottom:

During the test, the button will change as:

If successful, the button will show:

• Name: Transmission.
• Enable: Checked.
• Host: 172.19.0.32. This is the ipv4_address as defined for Transmission in the Dockerfile.
• Port: 9091: This is the Port as defined for Transmission in the Dockerfile.
• Url Base: <blank>.
• Username: admin.
• Password: admin.
• Category: <blank>.
• Directory: <blank>.
• Recent Priority: Last.
• Older Priority: Last.
• Add Paused: Not Checked.
• Use SSL: Not Checked.
• Client Priority: 3. This is set to 3, as I prefer SABnzbd to which I have set this as 1, followed by NZBGet which I have set as a 2.
• Click Save.

Click on the Test button at the bottom:

During the test, the button will change as:

If successful, the button will show:

• Enable: Checked.
• Remove: Checked.

• Redownlad: Checked.
• Remove: Checked.

Click on the Plus sign and add in each of these:

All information obtained from the Dockerfile for each of the Download clients: Transmission, NZBGet and SABnzbd.

• Host: From the ipv4_address in the Dockerfile.
• Remote Path: Obtained from the
• Local Path: