Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Ubiquiti - Settings - Networks ======

{{:ubiquiti:settings:ubiquiti_-_settings_-_networks.png?800|}}

----

===== Create a New Network =====

{{:ubiquiti:settings:ubiquiti_-_settings_-_networks_-_create_a_new_network.png?800|}}

<WRAP info>
**NOTE:**  There are many different network types that can be created:

Any of these networks can be allocated to a VLAN.

  * **Corporate** is a general purpose network and by default is assigned to LAN.  
    * The UniFi controller will provision not only the VLAN itself but also a matching IP subnet for this VLAN.
    * IP subnets exist at Layer 3, whereas UniFi switches are purely Layer 2.
    * Therefore, if you have no USG, there's no point in creating a "Corporate" VLAN.
  * **Guest** will apply the Guest Control setting if you enable the Guest Portal.
  * **VLAN Only** will remove any subnet options and can be used to define VLANs for pure VLAN tagging purposes by Unifi switches.
    * This is the best choice to use for a VLAN, if not using a USG.

  * **VPN Client** is USG specific.
  * **Site-to-Site VPN** is USG specific.
  * **Remote user VPN** is USG specific.

</WRAP>


----

[[Ubiquiti:Settings:Networks:Clear|Clear]]

[[Ubiquiti:Settings:Networks:Guest|Guest]]

[[Ubiquiti:Settings:Networks:IOT|IOT]]

[[Ubiquiti:Settings:Networks:LAN|LAN]]

[[Ubiquiti:Settings:Networks:VPN|VPN]]

[[Ubiquiti:Settings:Networks:WAN|WAN]]