Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== PFSense - Troubleshooting ======

[[PFSense:Troubleshooting:Amazon app reports "Ooops, an error has occurred"|Amazon app reports "Ooops, an error has occurred"]]

[[PFSense:Troubleshooting:Crash Report|Crash Report]]

[[PFSense:Troubleshooting:Disk usage increasing|Disk usage increasing]]

[[PFSense:Troubleshooting:Firewall Blocking an Internal Address|Firewall Blocking an Internal Address]]

[[PFSense:Troubleshooting:mbuf full|mbuf full]]

[[PFSense:Troubleshooting:PfSense is restoring the configuration|PfSense is restoring the configuration]]

[[PFSense:Troubleshooting:SSL_ERROR_RX_RECORD_TOO_LONG|SSL_ERROR_RX_RECORD_TOO_LONG]]

[[PFSense:Troubleshooting:Tuning and Troubleshooting Network Cards|Tuning and Troubleshooting Network Cards]]

[[PFSense:Troubleshooting:OpenVPN Client Common Name shows as UNDEF|OpenVPN Client Common Name shows as UNDEF]]

[[PFSense:Troubleshooting:Out of disk space on /var/run|Out of disk space on /var/run]]





----

===== PFSENSE BEHIND A ROUTER =====

From: http://hakology.co.uk/2014/02/pfsense-behind-a-router/ 

<code>
Can pfsense ping router – NO - WAN config error.
Can pfsense ping pfsense client – NO – LAN config error / Client firewall.
Can pfsense client ping pfsense – NO – LAN config error / Client firewall.
Can pfsense ping 8.8.8.8 – NO – ASDL/CABLE router config error.
Can pfsense client ping router – NO – NAT error.
Can pfsense client ping 8.8.8.8 – NO – NAT error / ADSL / CABLE config error.
Can pfsense client ping 8.8.8.8 – YES – All good.
Can pfsense client load a website – NO – DNS Error – Check everything above is OK.
Can pfsense client load a website – YES – Everything is working.
</code>

If you are having issue make sure you disable any firewalls you have running on the pfsense client boxes … once you have your network configured you can enable them later.

----