Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== C - C++ IO Tips ======

===== C++ IO Header Files =====

Header files to include when using C++ I/O.

<code c++>
#include<iostream>
</code>

Include this file whenever using C++ I/O.


<code c++>
#include<iomanip>
</code>

This file must be included for most C++ manipulators.

<code c++>
#include<fstream>
</code>

Include this file whenever working with files.


===== Leading whitespace =====

By default, leading whitespace (carriage returns, tabs, spaces) is ignored by cin.

Given:

<code c++>
int i;
float fl;
std::cin >> fl;
std::cin >> i;
</code>

And you type: 3.14<return>42<return>

  - 3.14 is read into fl . The carriage return (newline) following the 3.14 is still sitting on the input buffer.
  - Since std::cin ignores whitespace, the first return is "eaten" by std::cin >> i.  Then the integer 42 is read into i and the second return is left on the input buffer.


===== Read in an entire line =====

**std::cin.getline()** can run into problems when used with **std::cin >> var**.

**getline** can be provided a third argument; a "stop" character.  This character ends getline's input.  The character is eaten and the string is terminated.  

Example:

<code c++>
std::cin.getline(str, 100, '|')
</code>

If **std::cin.getline()** is not provided a "stop" character as a third argument, it will stop when it reaches a newline.

Given:

<code c++>
  float fl;
  std::cin >> fl;
  char str[101]
  std::cin.getline(str, 101);
</code>
  
And you type: 3.14<return>

  - 3.14 is read into fl . The newline following the 3.14 is still sitting on the input buffer.
  - std::cin.getline(str, 101) immediately processes the newline that is still on the input buffer.  str becomes an empty string.
  - The illusion is that the application "skipped" the std::cin.getline() statement.

The solution is to add **std::cin.ignore();** immediately after the first **std::cin** statement.  This will grab a character off of the input buffer (in this case, newline) and discard it.

**std::cin.ignore()** can be called three different ways:

  * No arguments: A single character is taken from the input buffer and discarded:

<code c++>
std::cin.ignore(); //discard 1 character
</code>

  * One argument: The number of characters specified are taken from the input buffer and discarded:

<code c++>
std::cin.ignore(33); //discard 33 characters
</code>

  * Two arguments: discard the number of characters specified, or discard characters up to and including the specified delimiter (whichever comes first):

<code c++>
std::cin.ignore(26, '\n'); //ignore 26 characters or to a newline, whichever comes first
</code>


===== Reading in numbers directly is problematic =====

If **std::cin** is presented with input it cannot process, std::cin goes into a "fail" state.

The input it cannot process is left on the input stream.

All input will be ignored by **std::cin** until the "fail" state is cleared: **std::cin.clear()**.

A routine that reads a number directly should:

  * Read in the number.
  * Check to see that the input stream is still valid.
  * If the input stream is not good (!std::cin)
    * Call std::cin.clear() to take the stream out of the "fail" state.
    * Remove from the stream the input that caused the problem: std::cin.ignore(...)
    * Get the input again if appropriate or otherwise handle the error

Inputting numbers directly, version 1:

<code c++>
  #include<limits> //for numeric_limits
  float fl;
  int bad_input;
  do{
    bad_input=0;
    std::cin >> fl;
    if(!std::cin)
    {
      bad_input=1;
      std::cin.clear();
      std::cin.ignore(std::numeric_limits<streamsize>::max(),'\n');
    }

  }while(bad_input);
</code>
  
Inputting numbers directly, version 2:

<code c++>
  #include<limits> //for numeric_limits
  float fl;
  while(!(std::cin >> fl))
  {
    std::cin.clear();
    std::cin.ignore(std::numeric_limits<streamsize>::max(),'\n');
  }
</code>
  
**NOTE**:  A note on limits.  If your compiler doesn't support **std::numeric_limits<streamsize>::max()**, an alternative is to use the c-style method for determining the maximum integer allowed:

<code c++>
#include<climits>
...
std::cin.ignore(INT_MAX, '\n');
</code>


===== Using getline to input numbers is a more robust alternate to reading numbers directly =====

<code c++>
 #include <cstdlib>
...
int i;
float fl;
char temp[100];

std::cin.getline(temp, 100);
fl=strtof(temp,0);
std::cin.getline(temp, 100);
i=strtol(temp,0,10);
</code>

  * getline will read both strings and numbers without going into a "fail" state.
  * Include **cstdlib** to use the converter functions: string-to-long-integer (**strtol**), string-to-double (**strtod**), string-to-float (**strtof**), and string-to-long-double (**strtold**).  Refer to a reference for more information on the second (and third for **strtol**) arguments to these converter functions.


===== Once a file is opened, it may be used exactly as std::cin is used. =====

<code c++>
std::ifstream someVarName("data.txt");
float fl;
char temp[100];
someVarName.getline(temp, 100);
fl=strtof(temp);
int i;
someVarName >> i;
</code>


===== When reading an entire file, embed the file input inside of the loop condition =====

<code c++>
std::ifstream inf("data.txt");
char temp[100];
while(!inf.getline(temp, 100).eof())
{
  //process the line
}
</code>

  * the loop will exit once the end of the file is reached

If the expression in the while() loop above is confusing, I've provided an explanation: [[http://www.augustcouncil.com/~tgibson/tutorial/UnderstandingComplexExpressions.pdf|UnderstandingComplexExpressions.pdf]].


===== Getline can be told to stop grabbing input at any designated character =====

<code c++>
char temp[100];
std::cin.getline(temp, 100, '|');
</code>

  * If only two arguments are supplied to getline, getline will stop at the end of the line (at the newline character).
  * If three arguments are supplied to getline, getline will stop at the character designated by the third argument.
  * The stop character is not copied to the string.
  * The stop character is "eaten" (removed from the input stream).


===== Delimited files can easily be read using a while loop and getline. =====

Given data file:

<file>
  John|83|52.2
  swimming|Jefferson
  Jane|26|10.09
  sprinting|San Marin
</file>  

Process using:

<code c++>
std::ifstream inf("data.txt");
char name[30];
while(!inf.getline(name, 30, '|').eof())
{
  Athlete* ap;
  char jersey_number[10];
  char best_time[10];
  char sport[40];
  char high_school[40];
  inf.getline(jersey_number, 10, '|'); #read thru pipe
  inf.getline(best_time, 10);          #read thru newline
  inf.getline(sport, 40, '|');         #read thru pipe
  inf.getline(high_school, 40);        #read thru newline
  ap = new Athlete(name, strtod(number), strtof(best_time), sport, high_school);
  //do something with ap
}
</code>

  * In a delimited file, only the first field should be in the while loop
  * For each field:  If the field is the last field in the line or the only field in the line, be sure that **getline** stops at a newline and not some other delimiter


===== Using C++-style strings =====

All of the previous examples have assumed that C-style strings (null-terminated character arrays) were being used.  C++ provides a string class that, when combined with a particular "getline" function, can dynamically resize to accommodate user input.  In general, C++ strings are preferred over C strings.

Given data file:

<file>
  John|83|52.2
  swimming|Jefferson
  Jane|26|10.09
  sprinting|San Marin
</file>
  
Here is the same code shown above, this time using C++ strings:

<code c++>
#include <string>
std::ifstream inf("data.txt");
string name;
while(!std::getline(inf, name, '|').eof())
{
  Athlete* ap;
  std::string jersey_number;
  std::string best_time;
  std::string sport;
  string high_school;
  std::getline(inf, jersey_number, '|'); #read thru pipe
  std::getline(inf, best_time);          #read thru newline
  std::getline(inf, sport, '|');         #read thru pipe
  std::getline(inf, high_school);        #read thru newline
  ap = new Athlete(name, strtod(number.c_str()), 
       strtof(best_time.c_str()), sport, high_school);
  //do something with ap
}
</code>

How to prepare the output stream to print fixed precision numbers (3.40 instead of 3.4)

<code c++>
  std::cout.setf(std::ios::fixed, std::ios::floatfield);
  std::cout.setf(std::ios::showpoint);
  std::cout.precision(2);
</code>  


===== How to set the width of a printing field =====

Given: int one=4, two=44;

<code c++>
  std::cout << one << std::endl.; 
  //output:  "4"

  std::cout << setw(2) << one << std::endl.;
  //output:  " 4"

  std::cout.fill('X');
  std::cout << setw(2) << one << std::endl.;
  //output:  "X4"

  std::cout.fill('X');
  std::cout << setw(2) << two << std::endl.;
  //output:  "44"
</code>  

  * The default fill character is a space.
  * A common fill character when printing numbers is zero "0".