Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== BASH - Functions - My Functions ======

<file bash /etc/profile.d/bash_functions.sh>
#-------------------------------------------------------------
# Archiving functions.
#-------------------------------------------------------------

# Creates an archive.
archive() {
  if [ "$#" -ne 0 ] ; then
    FILE="$1"
    case "$FILE" in
      *.tar.bz2|*.tbz2) shift && tar cvjf "$FILE" $* ;;
      *.tar.gz|*.tgz)   shift && tar cvzf "$FILE" $* ;;
      *.tar)            shift && tar cvf "$FILE" $* ;;
      *.rar)            shift && rar "$FILE" $* ;;
      *.zip)            shift && zip "$FILE" $* ;;
      *.7z)             shift && 7zr a "$FILE" $* ;;
      *)                echo "'$1' cannot be archived via archive()" ;;
    esac
  else
    echo "usage: archive [file] [contents]"
  fi
}


# Extract an archive of any type.
extract() {
  local opt
  local OPTIND=1
  while getopts "hv?" opt; do
    case "$opt" in
      h)
        cat <<End-Of-Usage
Usage: ${FUNCNAME[0]} [option] <archives>
    options:
        -h  show this message and exit
        -v  verbosely list files processed
End-Of-Usage
        return
        ;;
      v)
        local -r verbose='v'
        ;;
      ?)
        extract -h >&2
        return 1
        ;;
      esac
  done
  shift $((OPTIND-1))

  [ $# -eq 0 ] && extract -h && return 1
  while [ $# -gt 0 ]; do
    if [ -f "$1" ]; then
      case "$1" in
        *.tar.bz2|*.tbz|*.tbz2) tar "xvjf" "$1" ;;
        *.tar.gz|*.tgz) tar "xvzf" "$1" ;;
#        *.tar.xz) tar "xvJf" "$1" ;;
        *.tar.xz) xz --decompress "$1"; set -- "$@" "${1:0:-3}" ;;
        *.tar.Z) uncompress "$1"; set -- "$@" "${1:0:-2}" ;;
        *.bz2) bunzip2 "$1" ;;
        *.deb) dpkg-deb -xv "$1" "${1:0:-4}" ;;
#        *.deb) sudo dpkg -i $1 ;;
        *.exe) cabextract "$1" ;;
        *.pax.gz) gunzip "$1"; set -- "$@" "${1:0:-3}" ;;
        *.gz) gunzip "$1" ;;
        *.lzma) unlzma "$1" ;;
        *.pax) pax -r -f "$1" ;;
        *.pkg) pkgutil --expand "$1" "${1:0:-4}" ;;
        *.rar) unrar x "$1" ;;
        *.rpm) rpm2cpio "$1" | cpio -idmv ;;
#        *.rpm) sudo alien -dik $1;;
        *.tar) tar "xvf" "$1" ;;
        *.txz) mv "$1" "${1:0:-4}.tar.xz"; set -- "$@" "${1:0:-4}.tar.xz" ;;
#        *.xz) unxz "$1" ;;
        *.xz) xz --decompress "$1" ;;
        *.zip|*.war|*.jar) unzip "$1" ;;
        *.Z) uncompress "$1" ;;
#        *.7z) 7za x "$1" ;;
        *.7z) 7z x "$1" ;;
        *.arj|*.cab|*.chm|*.dmg|*.iso|*.lzh|*.msi|*.udf|*.wim|*.xar) 7z x "$1" ;;  ## *.deb|*.rpm
        *) echo "'$1' cannot be extracted via extract" >&2;;
      esac
    else
      echo "extract: '$1' is not a valid file" >&2
    fi
      shift
  done
}


# ls archives (inspired by `extract`)
lsz() {
  if [ $# -ne 1 ]
  then
      echo "lsz filename.[tar,tgz,gz,rar,zip,etc]"
      return 1
  fi
  if [ -f $1 ] ; then
    case $1 in
      *.tar.bz2|*.tar.gz|*.tar|*.tbz2|*.tgz) tar tvf $1;;
      *.rar)  unrar l $1;;
      *.zip)  unzip -l $1;;
      *)      echo "'$1' unrecognized." ;;
    esac
  else
    echo "'$1' is not a valid file"
  fi
}


# Creates an archive (*.tar.gz) from given directory.
maketar() { tar cvzf "${1%%/}.tar.gz"  "${1%%/}/"; }

# Create a ZIP archive of a file or folder.
makezip() { zip -r "${1%%/}.zip" "$1" ; }


#-------------------------------------------------------------
# Backup functions.
#-------------------------------------------------------------

# Copy a file to the current directory with today’s date automatically appended to the end.
# Usage:  bu filename.txt
bu()
{
  cp “$1” “$1”.backup-`date +%H%M%S_%y%m%d`;
}


#-------------------------------------------------------------
# Calculator functions.
#-------------------------------------------------------------

# Calculate an expression e.g. calc 1+1.
calc() {
  echo "$@"|bc -l;
#  bc -l <<< "$@"
}


#-------------------------------------------------------------
# cd.
#-------------------------------------------------------------

# cd = pushd, b = go backwards (popd), f = go forwards (kind of like "unpopd").
#alias d='dirs'
#alias b='pushd +1'
#alias f='pushd -0'
cd() {
  if [ "$*" = "" ]; then
    pushd $HOME >/dev/null
  else
    pushd "$*" >/dev/null
  fi
}


# cd to the directory a symbolically linked file is in.
cdlink() {
  if [ "x$1" = "x" ] ; then
    echo "Missing Arg"
  elif [ -L "$1" ] ; then
    link=`/bin/ls -l $1 | tr -s ' ' | cut -d' ' -f11`
    if [ "x$link" = "x" ] ; then
      echo "Failed to get link"
      return
    fi
    dirName_=`dirname $link`
    cd "$dirName_"
  else
    echo "$1 is not a symbolic link"
  fi
  return
}


# cd to the dir that a file is found in.
cdff() {
  filename=`find . -name $1 | grep -iv "Permission Denied" | head -1`
  if [ "xx${filename}xx" != "xxxx" ] ; then
    dirname=${filename%/*}
    if [ -d $dirname ] ; then
      cd $dirname
    fi
  fi
}


#-------------------------------------------------------------
# Directory functions.
#-------------------------------------------------------------

# CHMOD _D_irectory _R_ecursivly
chmoddr() {
  if [ -d "$1" ]; then
   echo "error: please use the mode first, then the directory";
   return 1;
  elif [ -d "$2" ]; then
   find $2 -type d -print0 | xargs -0 chmod $1;
  fi
}


function dus () {
du --max-depth=0 -k * | sort -n | awk '{ if($1>=1024*1024) {size=$1/1024/1024; unit="G"} else if($1>=1024) {size=$1/1024; unit="M"} else {size=$1; unit="K"}; if(size<10) format="%.1f%s"; else format="%.0f%s"; res=sprintf(format,size,unit); printf "%-8s %s\n",res,$2 }'
}


# Jumps to a directory at any level below using globstar.
jd() {
  if [ -z $1 ]; then
    echo "Usage: jd [directory]";
    return 1
  else
    cd **/$@
  fi
}


# mkdir, follow it with cd to that directory.
function mkcd {
  if [ -n "$1" -a ! -a "$1" ]
  then
    mkdir "$1"
    cd "$1"
  else
    echo NO
  fi
}


# Go up a specified number of directories.
# If you pass no arguments, it just goes up one directory.
# If you pass a numeric argument it will go up that number of directories.
# If you pass a string argument, it will look for a parent directory with that name and go up to it.
up() {
  dir=""
  if [ -z "$1" ]; then
    dir=..
  elif [[ $1 =~ ^[0-9]+$ ]]; then
    x=0
    while [ $x -lt ${1:-1} ]; do
      dir=${dir}../
      x=$(($x+1))
    done
  else
    dir=${PWD%/$1/*}/$1
  fi
  cd "$dir";
}


#-------------------------------------------------------------
# Disk functions.
#-------------------------------------------------------------

# Pretty-print of 'df' output.
# Inspired by 'dfc' utility.
mydf() {····
  for fs ; do

    if [ ! -d $fs ]; then
      echo -e $fs" :No such file or directory" ; continue
    fi

    local info=( $(command df -P $fs | awk 'END{ print $2,$3,$5 }') )
    local free=( $(command df -Pkh $fs | awk 'END{ print $4 }') )
    local nbstars=$(( 20 * ${info[1]} / ${info[0]} ))
    local out="["
    for ((j=0;j<20;j++)); do
      if [ ${j} -lt ${nbstars} ]; then
        out=$out"*"
      else
        out=$out"-"
      fi
    done
    out=${info[2]}" "$out"] ("$free" free on "$fs")"
    echo -e $out
  done
}


#-------------------------------------------------------------
# Docker functions.
#-------------------------------------------------------------

function dockershellhere() {
  dirname=${PWD##*/}
  docker run --rm -it --entrypoint=/bin/bash -v `pwd`:/${dirname} -w /${dirname} "$@"
}


function dockershellshhere() {
  dirname=${PWD##*/}
  docker run --rm -it --entrypoint=/bin/sh -v `pwd`:/${dirname} -w /${dirname} "$@"
}


# Listing Docker Tags.
# Example:  dockertags python
dockertags () {
    local image="${1}"

    wget -q https://registry.hub.docker.com/v1/repositories/"${image}"/tags -O - \
        | tr -d '[]" ' | tr '}' '\n' | awk -F: '{print $3}'
}



# Bash into Docker container.
dockerbash() { docker exec -it $@ bash; }
dockersh() { docker exec -it $@ sh; }

# Bash into Kubernetes Pod.
kubsh() { kubectl exec -it $@ -- /bin/sh; }
kubbash() { kubectl exec -it $@ -- /bin/bash; }


#-------------------------------------------------------------
# Downloading functions.
#-------------------------------------------------------------

# More persistent wget for fetching files to a specific filename.
wgettofile() {
  [ $# -ne 2 ] && echo "usage: wgettofile <url> <filename>" && return 1
  urltofetch=$1
  fname="$2"
  wget -O "$fname" $urltofetch
}

  
#-------------------------------------------------------------
# Email functions.
#-------------------------------------------------------------
    
# Email me a short note.
emailme() {
  if [ $# -eq 0 ]; then
    echo Usage: emailme text
    return 1
  fi
  echo "$*" | mailx -s "$*" peter 
  echo "Sent email"
}


#-------------------------------------------------------------
# File functions.
#-------------------------------------------------------------
  
# Backup file(s)
filebackup() {
  if [ $# -lt 1 ]; then
    echo Please supply a file to backup
    return 1
  fi
  date=`date +%Y%m%d-%H%M%S`
  for i in "$@"
  do
    echo Backed up $i to $i.$date
    cp $i $i.$date
  done
}


# Output a text file with line numbers
#
# Overriding the newline-to-tab conversion (with the -d flag) and
# replacing newlines with TAB-newline, maintaining the newline·
# but indenting it. sed = will number the lines in the output,·
# and the -s switch on paste will restore our whitespace keeping·
# the line number justified to the left.
filecatno() {
  if [ $# == 0 ]; then
    echo "No filename provided."
  else
    sed = "$1" | paste -s -d '\t\n' - -
  fi
}


# Show all strings (ASCII & Unicode) in a file.
filecatstr() { cat "$1" | tr -d "\0" | strings ; }


# Changes the extension of all of the specified files in a directory.
# It takes two arguments, first the original extension,·
# then the extension to replace it with.·
# For example
#   filechgext html php
filechgext() {
  for file in *.$1 ; do mv "$file" "${file%.$1}.$2" ; done
}


# Count the file arguments matching the file operator
# Synopsys:
# count_files operator FILE [...]
# Arguments:
# $1: The file operator
#   Allowed values:
#   -a FILE    True if file exists.
#   -b FILE    True if file is block special.
#   -c FILE    True if file is character special.
#   -d FILE    True if file is a directory.
#   -e FILE    True if file exists.
#   -f FILE    True if file exists and is a regular file.
#   -g FILE    True if file is set-group-id.
#   -h FILE    True if file is a symbolic link.
#   -L FILE    True if file is a symbolic link.
#   -k FILE    True if file has its `sticky' bit set.
#   -p FILE    True if file is a named pipe.
#   -r FILE    True if file is readable by you.
#   -s FILE    True if file exists and is not empty.
#   -S FILE    True if file is a socket.
#   -t FD      True if FD is opened on a terminal.
#   -u FILE    True if the file is set-user-id.
#   -w FILE    True if the file is writable by you.
#   -x FILE    True if the file is executable by you.
#   -O FILE    True if the file is effectively owned by you.
#   -G FILE    True if the file is effectively owned by your group.
#   -N FILE    True if the file has been modified since it was last read.
# $@: The files arguments
#
# Output:
#   The number of matching files.
#
# Return:
#   1: Unknown file operator.
#
# Example usages:
#   count_files -f log*.txt
#   count_files -d datadir*
filecountbytype()
{
  operator=$1
  shift
  case $operator in
    -[abcdefghLkprsStuwxOGN])
      for arg; do
        # If file is not of required type.
        if ! test "$operator" "$arg"; then
          # Shift it out.
          shift
        fi
      done
      echo $#
      ;;
    *)
      printf 'Invalid file operator: %s\n' "$operator" >&2
      return 1
      ;;
  esac
}

#filecountbytype "$@"


# Find a file with pattern $1 in name and Execute $2 on it:
fileexec() {·
  find . -type f -iname '*'"${1:-}"'*' \
    -exec ${2:-file} {} \;  ; }


# Fast find, using globstar.
filefind() {
  ls -ltr **/$@
}


# Swap 2 filenames around, if they exist.
fileswap() {
  local TMPFILE=tmp.$$

  [ $# -ne 2 ] && echo "Usage: fileswap file1 file2" && return 1
#  [ $# -ne 2 ] && echo "fileswap: 2 arguments needed" && return 1
  [ ! -e $1 ] && echo "fileswap: $1 does not exist" && return 1
  [ ! -e $2 ] && echo "fileswap: $2 does not exist" && return 1

  mv "$1" $TMPFILE
  mv "$2" "$1"
  mv $TMPFILE "$2"
}


# Moves file to ~/.Trash (use instead of rm).
filetrash() {
  if [ $# -eq 0 ]; then
    echo Usage: filetrash FILE...
    return 1
  fi
  local DATE=$(date +%Y%m%d)
  [ -d "${HOME}/.Trash/${DATE}" ] || mkdir -p ${HOME}/.Trash/${DATE}
  for FILE in "$@"
  do
    mv "${FILE}" "${HOME}/.Trash/${DATE}"
    echo "${FILE} trashed!" 
  done
}


# Overwrite a file with zeroes.
filezero() {
  case "$1" in
    "")     echo "Usage: filezero "
            return -1;
  esac
  filesize=`wc -c  "$1" | awk '{print $1}'`
  dd if=/dev/zero of=$1 count=$filesize bs=1
} 


# Check a JSON file.
# usage: json file.json
# If all is well, it will print the JSON file to the screen.
# If there is an error in the file, the error is printed along with the offending line number.
function json() {
  cat "$@" | /usr/bin/python -m json.tool ;
}



# Returns one random line from the file specified as first parameter.
function fileraffle() {
  head -$((${RANDOM} % `wc -l < $1` + 1)) $1 | tail -1
}


# Use null to zero/create a file.
function touchf() {
  [[ $# -gt 0 ]] && cat /dev/null > "$*";
}


  
#-------------------------------------------------------------
# Firewall functions.
#-------------------------------------------------------------
  
# Ban IP
ban() {
  if [ "`id -u`" == "0" ] ; then
    iptables -A INPUT -s $1 -j DROP
  else
    sudo iptables -A INPUT -s $1 -j DROP
  fi
}   
    
  
#-------------------------------------------------------------
# Grep Find Search functions.
#-------------------------------------------------------------

# Find a file with a pattern in name:
ff() { find . -type f -iname '*'"$*"'*' -ls ; }

# Find a file whose name starts with a given string.
ffs() { /usr/bin/find . -name "$@"'*' ; }

# Find a file whose name ends with a given string.
ffe() { /usr/bin/find . -name '*'"$@" ; }

# Find files larger than a certain size (in bytes).
ffbigger() { find . -type f 2>/dev/null | xargs \du -a -b 2>/dev/null | awk "{ if ( \$1 > $@) print \$0 }" | sort -hr; }

# Find a pattern in a set of files and highlight them:
# (needs a recent version of egrep).
findstr() {
  OPTIND=1
  local mycase=""
  local usage="findstr: find string in files.
Usage: grepstr [-i] \"pattern\" [\"filename pattern\"] "
  while getopts :it opt
  do
    case "$opt" in
      i) mycase="-i " ;;
      *) echo "$usage"; return ;;
    esac
  done
  shift $(( $OPTIND - 1 ))
  if [ "$#" -lt 1 ]; then
    echo "$usage"
    return;
  fi
  find . -type f -name "${2:-*}" -print0 | \
    xargs -0 egrep --color=always -sn ${case} "$1" 2>&- | more
}


# Search for a word in the Unix word list.
word() { /bin/grep ^"$@"$ /usr/share/dict/words ; }
    

# Search for a word in the Unix word list that ends with the chars.
wordstarts() { /bin/grep ^"$@" /usr/share/dict/words ; }
    

# Search for a word in the Unix word list that ends with the chars.
wordends() { /bin/grep "$@"$ /usr/share/dict/words ; }


#wordsall() { /bin/grep "^[$W]*$" /usr/share/dict/words ; }
#wordsall() { /bin/grep "^[$@]*$" /usr/share/dict/words ; }
words() { /bin/grep ^"[$@]+"$ /usr/share/dict/words ; }


# Splits a word into separate letter combinations.
wordc(){
  combos () {
    local word=$1
    local len=${#word}
#    local first=${word:0:1}
#    echo "$first"
    for ((i=1; i <= len; i++ )); do
      local first=${word:i-1:1}
      echo "$first"
        for ((j=1; i+j <= len; j++ )); do
            echo "$first${word:i:j}"
        done
    done
  }
  combos $1
}
  
  

# Splits a word into separate letter permutations.
wordp() {
  function permutate {
    if [ "${#1}" = 1 ]; then
        echo "${2}${1}"
#        /bin/grep ^"${2}${1}"$ /usr/share/dict/words
#        /bin/grep ^"${2}"$ /usr/share/dict/words
  #      echo "${1}"
  #      echo "${2}"
    else
        for i in $(seq 0 $((${#1}-1)) ); do
            pre="${2}${1:$i:1}"
            seg1="${1:0:$i}"
            seg2="${1:$((i+1))}"
            seg="${seg1}${seg2}"
            permutate "$seg" "$pre"
        done
    fi
  }

#permutate $@
permutate $1
}


# Usage:  wordd cat | sort | uniq
wordd(){
  combos () {
    local word=$1
    local len=${#word}

    #for ((i=1; i < len; i++ )); do
    #  local first=${word:0:1}
    #done
    for ((i=0; i<=len; i++ )); do
        for ((j=0; j<=len; j++ )); do
          for ((w=1; w<=len; w++ )); do
            #printf "%s%s%s", chars[i], chars[j], (j<numChars ? OFS : ORS)
            #echo "$first${word:i:j}"
            local charsi=${word:i:w}
            local charsj=${word:j:w}
    if [[ $i != $j && $charsi != $charsj ]]; then
            echo "$charsi$charsj"
    fi
            #echo "$first${word:i:j}"
          done
        done
    done
  }
  combos $1
}




# TODO - DETERMINE WHAT THIS IS FOR...PERHAPS DELETE.
wordsx() {
w="$@"
sortedWord=`echo "$@" | grep -o . | sort | tr -d '\n'`
echo $sortedWords

while read line
do
    sortedLine=`echo $line | grep -o . | sort | tr -d '\n'`
    if [ "$sortedWord" == "$sortedLine" ]
    then
        echo $line
    fi
done < /usr/share/dict/words
}


#-------------------------------------------------------------
# History functions.
#-------------------------------------------------------------
        
#histtop10()
#{
#  history | awk '{CMD[$2]++;count++;}END { for (a in CMD)print CMD[a] " " CMD[a]/count*100 "% " a;}' | grep -v "./" | column -c3 -s " " -t | sort -nr | nl |  head -n10
#}
        


# Returns top 10 commands used in the history.
# Check alias candidates.
function hist10() {
  history | \
        awk '{CMD[$2]++;count++;}END { for (a in CMD)print CMD[a] " " CMD[a]/count*100 "% " a;}' \
            | grep -v "./" | column -c3 -s " " -t | sort -nr | nl |  head -n10
}


#-------------------------------------------------------------
# Image functions.
#-------------------------------------------------------------

# Scrape images.
# Example: imagescrape https://example.com/
imagescraoe() {
  wget -nd -H -p -A jpg,jpeg,png,gif -e robots=off $1
}


#-------------------------------------------------------------
# Info functions.
#-------------------------------------------------------------

# Get current host related info.
ii() {
  echo -e "\nYou are logged on ${BRed}$HOST"
  echo -e "\n${BRed}Additionnal information:$NC " ; uname -a
  echo -e "\n${BRed}Users logged on:$NC " ; w -hs |
    cut -d " " -f1 | sort | uniq
  echo -e "\n${BRed}Current date :$NC " ; date
  echo -e "\n${BRed}Machine stats :$NC " ; uptime
  echo -e "\n${BRed}Memory stats :$NC " ; free
  echo -e "\n${BRed}Diskspace :$NC " ; mydf / $HOME
  echo -e "\n${BRed}Local IP Address :$NC" ; myip
  echo -e "\n${BRed}Open connections :$NC "; netstat -pan --inet;
  echo
}


function info() {
  printf "\n"
  #printf "   %s\n" "IP ADDR: $(curl ifconfig.me)"
  printf "   %s\n" "USER: $(echo $USER)"
  printf "   %s\n" "DATE: $(date)"
  printf "   %s\n" "UPTIME: $(uptime -p)"
  printf "   %s\n" "HOSTNAME: $(hostname -f)"
  printf "   %s\n" "CPU: $(awk -F: '/model name/{print $2}' | head -1)"
  printf "   %s\n" "KERNEL: $(uname -rms)"
  printf "   %s\n" "PACKAGES: $(dpkg --get-selections | wc -l)"
  printf "   %s\n" "RESOLUTION: $(xrandr | awk '/\*/{printf $1" "}')"
  printf "   %s\n" "MEMORY: $(free -m -h | awk '/Mem/{print $3"/"$2}')"
  printf "\n"
}


#-------------------------------------------------------------
# Misc functions.
#-------------------------------------------------------------


function add-line-numbers {
  awk '{print NR " " $0}' ;
}


# Waits for the user to press a y or n.
#
# Example:
#        if ask "Kill process $pid <$pname> with signal $sig?"
#            then kill $sig $pid
#        fi
ask() {
  echo -n "$@" '[y/n] ' ; read ans
  case "$ans" in
    y*|Y*) return 0 ;;
    *) return 1 ;;
  esac
}


# Chops the 1st column.
# Example: ls -al | chop-first-column
function chop-first-column
{
  awk '{for (i=2; i<NF; i++) printf $i " "; print $NF}' ;
}


# Repeat n times command.
#
# Example:
#   repeat 10 ls
repeat() {
  local i max
  max=$1; shift;
  for ((i=1; i <= max ; i++)); do  # --> C-like syntax
    eval "$@";
  done
}


# Do something very quietly.
runquiet() {
 ( $@ ) >/dev/null 2>/dev/null
}


# Try to do something and give it 3 attempts for it to work.
# (ideal for backup scripts etc when you don’t want to be woken up or turn up to work the following morning to a failed job).
try3() {
  $@ || $@ || $@
}


#-------------------------------------------------------------
# Mouse functions.
#-------------------------------------------------------------

# Get mouse cursor coordinates with xdotool
function getmousecoords() {
  xdotool getmouselocation|awk \
                '{sub(/^x:/,"",$1);\
                sub(/^y:/,"",$2);\
                print $1 " " $2}'
}


#-------------------------------------------------------------
# Network functions.
#-------------------------------------------------------------

# myIP address
ipall() {
  ifconfig lo | grep 'inet ' | sed -e 's/:/ /' | awk '{print "lo: " $2 " " $3 " " $4 " " $5 " " $6}'
  ifconfig em1 | grep 'inet ' | sed -e 's/:/ /' | awk '{print "em1 (IPv4): " $2 " " $3 " " $4 " " $5 " " $6}'
  ifconfig em1 | grep 'inet6 ' | sed -e 's/ / /' | awk '{print "em1 (IPv6): " $2 " " $3 " " $4 " " $5 " " $6}'
  ifconfig em2 | grep 'inet ' | sed -e 's/:/ /' | awk '{print "em2 (IPv4): " $2 " " $3 " " $4 " " $5 " " $6}'
  ifconfig em2 | grep 'inet6 ' | sed -e 's/ / /' | awk '{print "em2 (IPv6): " $2 " " $3 " " $4 " " $5 " " $6}'
}


# Get IP adress on ethernet.
#myip() {
#  MY_IP=$(/sbin/ifconfig em1 | awk '/inet/ { print $2 } ' |
#  sed -e s/addr://)
#  echo ${MY_IP:-"Not connected"}
#}


getip() {
  for each in $@; do
    echo $each
    echo "nslookup:"
    nslookup $each | grep Address: | grep -v '#' | egrep -o '([0-9]+\.){3}[0-9]+'
    echo "ping:"
    ping -c1 -t1 $each | egrep -o '([0-9]+\.){3}[0-9]+' | head -n1
  done
}


#-------------------------------------------------------------
# Password functions.
#-------------------------------------------------------------

# Random password generator (8 caractères par défaut)
genpasswd() {
  date +%s | sha256sum | base64 | head -c$1 ;echo
}


randompw() {
  cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w ${1:-32} | head -n 1
}



# Random number generator.
rand() {
  if [ -z "$1" ] # no argument
    then
      range=4
    else
      range=$1 # will error if argument is not a number
  fi
  local num
  for ((i=0;i<$range;i++))
    do
    num=$num$((RANDOM%9))
    done
  echo $num
#  printf "%s" $num
#  echo
}


#-------------------------------------------------------------
# Process functions.
#-------------------------------------------------------------

psnice() {
  if ! [ -z "$1" ]; then
    # Take a parameter pid.
    ionice -c3 -p$1 ; renice -n 19 -p $1
  else
    # If no parameter is nice the current pid (bash).
    ionice -c3 -p$$ ; renice -n 19 -p $$
  fi
}



# Kill Processes.
# Example:  pskill "firefox"
pskill () {
  ps aux | grep $1 > /dev/null
  mypid=$(pidof $1)
  if [ "$mypid" != "" ]; then
    kill -9 $(pidof $1)
    if [[ "$?" == "0" ]]; then
      echo "PID $mypid ($1) killed."
    fi
  else
    echo "None killed."
  fi
  return;
}



myuptime () {
  uptime | awk '{ print "Uptime:", $3, $4, $5 }' | sed 's/,//g'
  return;
}


#-------------------------------------------------------------
# Programming functions.
#-------------------------------------------------------------

# A quicker G++.
g++11() {
  echo "g++ -std=c++11 -Wall -Werror ${1}.cpp -o $1";
  echo "";
  g++ -std=c++11 -Wall -Werror ${1}.cpp -o ${1}.o;
}





#-------------------------------------------------------------
# Sound functions.
#-------------------------------------------------------------

# Removes audio from a video.
# Example: soundremoveaudio input.mp4m output.mp4
soundremoveaudio() {
  ffmpeg -i $1 -vcodec copy -an $2
}


#-------------------------------------------------------------
# String functions.
#-------------------------------------------------------------

# substring word start [length]
substring() {
  if [ $# -lt 2 ]; then
    echo "Usage: substring word start [length]"
    return 1
  fi
  if [ -z $3 ]; then
    echo ${1:$2}
  else
    echo ${1:$2:$3}
  fi
}


# Get length of string.
strlen() {
  if [ $# -ne 1 ]; then
    echo "Usage: length word"
    return 1
  fi
  echo ${#1}
}


# Convert string to upper-case.
strupper() {
  if [ $# -lt 1 ]; then
    echo "Usage: upper word"
    return 1
  fi
  echo ${@^^}
}


# Convert string to lower-case.
strlower() {
  if [ $# -lt 1 ]; then
    echo "Usage: lower word"
    return 1
  fi
  echo ${@,,}
}


# Replace part of string with another.
strreplace() {
  if [ $# -ne 3 ]; then
    echo "Usage: replace string substring replacement"
    return 1
  fi
  echo ${1/$2/$3}
}


# Replace all parts of a string with another.
strreplaceall() {
  if [ $# -ne 3 ]; then
    echo "Usage: replace string substring replacement"
    return 1
  fi
  echo ${1//$2/$3}
}


# Find index of specified string.
strindex() {
  if [ $# -ne 2 ]; then
    echo "Usage: index string substring"
    return 1
  fi
  expr index $1 $2
}


strquote() { echo "$@" | /bin/sed 's/^/"/;s/$/"/' ; }


# Surround string with whatever is given as 2nd param.
#
# Example:
#   strsurround abc 123
#   strsurround abc \"
#   strsurround abc \\\\
strsurround() {
  if [ $# -ne 2 ]; then
    echo Usage: surround string surround-with e.g. strsurround hello \\\"
    return 1
  fi
  echo $1 | sed "s/^/$2/;s/$/$2/" ;
}


#-------------------------------------------------------------
# Text functions.
#-------------------------------------------------------------

# Truncate lines longer than 80 characters (for use in pipes).
#alias cut80='/usr/bin/cut -c 1-80'
#cut80() { echo "$@" | cut -c 1-80 ; }

# Surround lines with quotes (useful in pipes).
quote() { echo "$@" | /bin/sed 's/^/"/;s/$/"/' ; }


# Translate spaces in filenames into underscores.
spaces2underscores ()
{
  targetdir="$*"
  if [ ! -z "$1" ]
  then
    if [ -d "${targetdir}" ]
    then
      oldpwd=$(pwd)
     else
      echo "Not a valid directory."
      return 1
     fi
  fi
  read -n1 -p "Rename all files in ${targetdir}? [y/N]"
  case ${REPLY} in
    "Y" | "y" )
      cd "${targetdir}"
      fncounter=0
      for fn in *
      do
        newfn=$(printf "${fn}" | tr ' ' '_')
        if [ "${newfn}" != "${fn}" ]
        then
           mv "${fn}" "${newfn}"
           fncounter=$((${fncounter}+1))
        fi
      done
      cd "${oldpwd}"
      echo "Successfully replaced spaces by underscores in ${fncounter} filename(s)."
      echo
      ;;
    *         )
      echo "Operation aborted."
      echo
      return 0
      ;;
  esac
  unset targetdir oldpwd REPLY fncounter fn newfn
}


# Translate underscores in filenames into spaces..
underscores2spaces ()
{
  targetdir="$*"
  if [ ! -z "$1" ]
  then
     if [ -d "${targetdir}" ]
     then
        oldpwd=$(pwd)
     else
        echo "Not a valid directory."
        return 1
     fi
  fi
  read -n1 -p "Rename all files in ${targetdir}? [y/N]"
  case ${REPLY} in
    "Y" | "y" )
     cd "${targetdir}"
     fncounter=0
     for fn in *
     do
        newfn=$(printf "${fn}" | tr '_' ' ')
        if [ "${newfn}" != "${fn}" ]
        then
           mv "${fn}" "${newfn}"
           fncounter=$((${fncounter}+1))
        fi
     done
     cd "${oldpwd}"
     echo "Successfully replaced underscores by spaces in ${fncounter} filename(s)."
     echo
     ;;
    *         )
     echo "Operation aborted."
     echo
     return 0
     ;;
  esac
  unset targetdir oldpwd REPLY fncounter fn newfn
}


#-------------------------------------------------------------
# USB functions.
#-------------------------------------------------------------

# Need to figure out which drive your usb is assigned? Functions work the same way as an alias. Simply copy the line into your .profile/.bashrc file. Then type: myusb
#myusb() { usb_array=();while read -r -d $'\n'; do usb_array+=("$REPLY"); done < <(find /dev/disk/by-path/ -type l -iname \*usb\*scsi\* -not -iname \*usb\*scsi\*part* -print0 | xargs -0 -iD$


# Need to figure out which drive your usb is assigned? Functions work the same way as an alias. Simply copy the line into your .profile/.bashrc file. Then type: myusb
myusb() { usb_array=();while read -r -d $'\n'; do usb_array+=("$REPLY"); done < <(find /dev/disk/by-path/ -type l -iname \*usb\*scsi\* -not -iname \*usb\*scsi\*part* -print0 | xargs -0 -iD\
  readlink -f D | cut -c 8) && for usb in "${usb_array[@]}"; do echo "USB drive assigned to sd$usb"; done; }



#-------------------------------------------------------------
# URL Encode functions.
#-------------------------------------------------------------

# Transform the arguments into a valid url querystring
urlencode()
{
  local args="$@"
  jq -nr --arg v "$args" '$v|@uri';
}

</file>