Differences

This shows you the differences between two versions of the page.

--- ubuntu:gpu:gpu_power_cable_guide [2023/06/05 11:43] – [Multiple 6+2-pin and 8-pin Power Connectors] peter
+++ ubuntu:gpu:gpu_power_cable_guide [2023/06/25 09:38] (current) – peter
@@ Line 5: / Line 5: @@
   * These power connectors are usually: 6-pin, 6+2-pin, 8-pin, and 12-pin.
+----
+===== Recommendation =====
+Always use two separate cables whenever possible!!!
+  * A splitter cable can still be used, but only make use of one of the ends into each connector of the GPU.
+{{:ubuntu:gpu:gpu_-_pcie_-_power_connections.png?600|}}
+<WRAP alert>
+**ALERT:**  Do **NOT** use splitter cables to power graphic cards.
+  * See alert below.
+  * **Always use two separate cables whenever possible!!!**.
+    * A splitter cable can still be used, but only make use of one of the ends into each connector of the GPU.
+</WRAP>
+----
 ===== GPU Power Cable Guide — Total Power Provided =====
@@ Line 52: / Line 73: @@
 </WRAP>
+<WRAP alert>
+**ALERT:**  Do **NOT** use splitter cables to power graphic cards.
+  * See alert below.
+  * **Always use two separate cables whenever possible!!!**.
+    * A splitter cable can still be used, but only make use of one of the ends into each connector of the GPU.
+</WRAP>
 ----
@@ Line 108: / Line 138: @@
   * The 150W is from the ATX spec for PSUs; which is followed by virtually all consumer desktop hardware; but not all!
-A single PCIe 8-pin cable and connectors maximum current rating is 12.5A, which is 150W (+12V x 12.5A). Watts = Volts x Amps.
+A single PCIe 8-pin cable and connectors maximum current rating is 12.5A, which is 150W (+12V x 12.5A); Watts = Volts x Amps.
+  * If the wires get too much power, they can melt; or worse, catch fire.
   * The actual power a cable will and can carry depends on quite a bit more.
   * This is why it is usually a bad idea to use splitter cables to power graphic cards.
-    * If you have a 400W graphics card, and you are powering it with a splitter; you are sending a whopping 33 Amps down a single set of wires.
+    * If you have a 400W graphics card, and you are powering it with a splitter; you are sending a whopping 27 Amps down a single set of wires.
     * That is just asking for trouble as you are leaning very heavily on the quality of your PSU.
-    * **Always use two separate cables whenever possible!!!**
+    * **Always use separate cables whenever possible!!!**
+      * A splitter cable can still be used, but only make use of one of the ends into each connector of the GPU.
 </WRAP>