Differences

This shows you the differences between two versions of the page.

--- ubiquiti:access_point_not_showing_up_in_pending_devices [2020/10/19 09:12] – 192.168.1.1
+++ ubiquiti:access_point_not_showing_up_in_pending_devices [2020/10/22 22:24] (current) – removed 192.168.1.1
@@ Line 1: / Line 1: @@
-====== Ubiquiti - Access Point not showing up in pending devices ======
-===== SSH into AP =====
-Run:
-<code>
-ssh admin@192.168.1.18
-admin@192.168.1.18's password:
-</code>
-returns
-<code>
-BusyBox v1.25.1 () built-in shell (ash)
-  ___ ___      .__________.__
- |   |   |____ |__\_  ____/__|
- |   |   /    \|  ||  __) |  |   (c) 2010-2020
- |   |  |   |  \  ||  \   |  |   Ubiquiti Networks, Inc.
- |______|___|  /__||__/   |__|
-            |_/                  https://www.ui.com/
-      Welcome to UniFi UAP-AC-Mesh-Pro!
-ACMeshPro1-BZ.v4.3.20#
-</code>
-----
-===== Get Information =====
-<code>
-info
-</code>
-returns:
-<code>
-Model:       UAP-AC-Mesh-Pro
-Version:     4.3.20.11298
-MAC Address: 78:8a:20:b0:7f:9c
-IP Address:  192.168.1.18
-Hostname:    ACMeshPro1
-Uptime:      232876 seconds
-Status:      Connected (http://192.168.1.10:8080/inform)
-</code>
-<WRAP info>
-**NOTE:**  The Status line at the bottom may indicate something like:
-Status:      Not Adopted (http://192.168.1.10:8080/inform)
-In this case, you may want to try the options below.
-</WRAP>
-----
-===== Inform Cloudkey to Adopt =====
-<code
-set-inform http://ip.address.of.cloudkey:8080/inform
-</code>
-  * Where the ip.address.of.cloudkey is either a private address if it is local or the public address if it is remote.
-</code>
-returns:
-<code>
-Adoption request sent to 'http://ip.address.of.cloudkey:8080/inform'.  Use the Controller to complete the adopt process.
-</code>