Differences

This shows you the differences between two versions of the page.

--- raid:mdadm:check_the_raid_status [2021/09/13 23:41] – peter
+++ raid:mdadm:check_the_raid_status [2021/09/14 08:41] (current) – peter
@@ Line 22: / Line 22: @@
       * **[faulty]** is a diagnostic personality; it does not mean there is a problem with the array.
-  * **md0**:  The device is /dev/md_0.
+  * **md0**:  The device is /dev/md0.
   * **active**:  The RAID is active and started.
     * An inactive array is usually faulty. Stopped arrays are not visible here.
@@ Line 35: / Line 35: @@
     * **sde3[1]** is device 1.
       * The order in which the devices appear in this line means nothing.
+  * **46824429696 blocks**:  The usable size of the array in blocks.
+  * **super 1.0**:  The array uses a 1.0 [[https://raid.wiki.kernel.org/index.php/RAID_superblock_formats|superblock]].
+  * **level 6**:  Confirms this is a level 6 array.
+  * **64k chunk**:  Has a chunk size of 64k.
+    * This is the size for 'chunks' and is only relevant to raid levels that involve striping (1,4,5,6,10).
+    * The address space of the array is conceptually divided into chunks and consecutive chunks are striped onto neighboring devices.
+  * **algorithm 2**:  Uses algorithm 2.
   * **[8/8]**:  The first number is the number of a complete raid devices as defined.  The second number is how many devices are in use.
   * **[UUUUUUUU]**:  The status of each device.