Differences

This shows you the differences between two versions of the page.

--- pfsense:suricata:custom_rules [2020/03/02 00:47] – peter
+++ pfsense:suricata:custom_rules [2021/01/21 10:21] (current) – removed peter
@@ Line 1: / Line 1: @@
-====== PFSense - Suricata - Custom Rules ======
-<WRAP warning>
-**WARNING:**  Every custom rules must have a unique SID!!!
-Make sure you pick a starting SID number that does not conflict with any existing SIDs from other enabled rules.
-Usually from 1000000.
-</WRAP>
-----
-To create custom passlist rules go to the RULES tab for the interface, choose CUSTOM RULES in the Category drop-down and then type in the rules you need.
-<code>
-Services > Suricata > Interfaces > INTERFACE > INTERFACE Rules > custom.rules
-</code>
-There are plenty of examples on the web.
-You can add restrictions by protocol, port and source or destination IP address.
-<WRAP important>
-WARNING:  Just really think about what your rule is allowing when creating it.
-</WRAP>
-<code>
-alert tcp [$EXTERNAL_NET,!8.8.8.8] any -> $HOME_NET [80,443]
-alert icmp any any -> any any (msg:"ICMP Packet found";sid:1000001;rev:1;classtype:icmp-event)
-alert tcp $HOME_NET any -> $EXTERNAL_NET ![80,8080] (msg:"HTTP Port Unauthorized"; appid: http; classtype:policy-violation; sid:12171008; rev:1;)
-alert tcp $HOME_NET any -> $EXTERNAL_NET !443 (msg:"HTTPS Port Unauthorized"; appid: https; classtype:policy-violation; sid:12171009; rev:1;)
-pass ip 1.2.3.4 any <> any any (msg:"pass all traffic from/to 1.2.3.4"; sid:100000;)
-pass ip 192.168.1.22/32 80 <- any any (msg: "Pass List Entry - allow all traffic to/from 192.168.1.22/32"; sid:1000006;
-</code>
-----
-===== Protocol Anomalies Detection =====
-Suricata IDS/IPS/NSM is also capable of doing protocol anomaly detection.
-Please find below a few self explanatory rule examples (look at the rule msg) of how to do this:
-<code>
-HTTP
-alert tcp any any -> any ![80,8080] (msg:"SURICATA HTTP but not tcp port 80, 8080"; flow:to_server; app-layer-protocol:http; sid:2271001; rev:1;)
-alert tcp any any -> any 80 (msg:"SURICATA Port 80 but not HTTP"; flow:to_server; app-layer-protocol:!http; sid:2271002; rev:1;)
-HTTPS
-alert http any any -> any 443 (msg:"SURICATA HTTP clear text on port 443"; flow:to_server; app-layer-protocol:http; sid:2271019; rev:1;)
-TLS
-alert tcp any any -> any 443 (msg:"SURICATA Port 443 but not TLS"; flow:to_server; app-layer-protocol:!tls; sid:2271003; rev:1;)
-FTP
-alert tcp any any -> any ![20,21] (msg:"SURICATA FTP but not tcp port 20 or 21"; flow:to_server; app-layer-protocol:ftp; sid:2271004; rev:1;)
-alert tcp any any -> any [20,21] (msg:"SURICATA TCP port 21 but not FTP"; flow:to_server; app-layer-protocol:!ftp; sid:2271005; rev:1;)
-SMTP
-alert tcp any any -> any ![25,587,465] (msg:"SURICATA SMTP but not tcp port 25,587,465"; flow:to_server; app-layer-protocol:smtp; sid:2271006; rev:1;)
-alert tcp any any -> any [25,587,465] (msg:"SURICATA TCP port 25,587,465 but not SMTP"; flow:to_server; app-layer-protocol:!smtp; sid:2271007; rev:1;)
-SSH
-alert tcp any any -> any !22 (msg:"SURICATA SSH but not tcp port 22"; flow:to_server; app-layer-protocol:ssh; sid:2271008; rev:1;)
-alert tcp any any -> any 22 (msg:"SURICATA TCP port 22 but not SSH"; flow:to_server; app-layer-protocol:!ssh; sid:2271009; rev:1;)
-IMAP
-alert tcp any any -> any !143 (msg:"SURICATA IMAP but not tcp port 143"; flow:to_server; app-layer-protocol:imap; sid:2271010; rev:1;)
-alert tcp any any -> any 143 (msg:"SURICATA TCP port 143 but not IMAP"; flow:to_server; app-layer-protocol:!imap; sid:2271011; rev:1;)
-SMB
-alert tcp any any -> any 139 (msg:"SURICATA TCP port 139 but not SMB"; flow:to_server; app-layer-protocol:!smb; sid:2271012; rev:1;)
-DCERPC
-alert tcp any any -> any [80,8080] (msg:"SURICATA DCERPC detected over port tcp 80,8080"; flow:to_server; app-layer-protocol:dcerpc; sid:2271013; rev:1;)
-DNS
-alert tcp any any -> any 53 (msg:"SURICATA TCP port 53 but not DNS"; flow:to_server; app-layer-protocol:!dns; sid:2271014; rev:1;)
-alert udp any any -> any 53 (msg:"SURICATA UDP port 53 but not DNS"; flow:to_server; app-layer-protocol:!dns; sid:2271015; rev:1;)
-MODBUS
-alert tcp any any -> any 502 (msg:"SURICATA TCP port 502 but not MODBUS"; flow:to_server; app-layer-protocol:!modbus; sid:2271018; rev:1;)
-</code>
-===== References =====
-https://www.cnblogs.com/lsgxeva/p/11392627.html
-http://manual-snort-org.s3-website-us-east-1.amazonaws.com/node27.html
-https://redmine.openinfosecfoundation.org/projects/suricata/wiki/Protocol_Anomalies_Detection