Differences

This shows you the differences between two versions of the page.

--- pfsense:install_pfsense:configure_interface_dhcp [2020/11/30 22:52] – created peter
+++ pfsense:install_pfsense:configure_interface_dhcp [2021/06/18 08:53] (current) – [Configure DHCP for the IOT Interface] peter
@@ Line 1: / Line 1: @@
 ====== PFSense - Install pfSense - Configure Interface DHCP ======
+===== Configure DHCP for the LAN Interface =====
+Navigate to **Services -> DHCP Server**.
+Select **LAN** tab and set the DHCP server as follows:
+  * Enabled:  **Checked**.
+  * Range:
+    * From:  **192.168.1.100**.
+    * To:  **192.168.1.199**.
+<WRAP info>
+**NOTE:**  Set each interface to use x.x.x.100-199 for dynamic addresses and reserve x.x.x.10-99 for static allocations.
+Depending on the number of devices in your network adjust this to suit your needs.
+</WRAP>
+{{:pfsense:install_pfsense:pfsense_-_services_-_dhcp_-_lan.png?800|}}
+----
+===== Configure DHCP for the CLEAR Interface =====
 Navigate to **Services -> DHCP Server**.
@@ Line 8: / Line 35: @@
   * Range:
     * From:  **192.168.50.100**.
-    * To:  **192.168.10.199**.
+    * To:  **192.168.50.199**.
 <WRAP info>
@@ Line 18: / Line 45: @@
 {{:pfsense:install_pfsense:pfsense_-_services_-_dhcp_-_clear.png?800|}}
+Configure external DNS providers:
+{{:pfsense:install_pfsense:pfsense_-_services_-_dhcp_-_clear_-_servers.png?800|}}
+<WRAP info>
+**NOTE:**  Change these as required.
+</WRAP>
 ----
+===== Configure DHCP for the IOT Interface =====
+Navigate to **Services -> DHCP Server**.
+Select **IOT** tab and set the DHCP server as follows:
+  * Enabled:  **Checked**.
+  * Range:
+    * From:  **192.168.70.100**.
+    * To:  **192.168.70.199**.
+<WRAP info>
+**NOTE:**  Set each interface to use x.x.x.100-199 for dynamic addresses and reserve x.x.x.10-99 for static allocations.
+Depending on the number of devices in your network adjust this to suit your needs.
+</WRAP>
+{{:pfsense:install_pfsense:pfsense_-_services_-_dhcp_-_iot.png?800|}}
+Configure external DNS providers:
+{{:pfsense:install_pfsense:pfsense_-_my_configuration_-_services_-_dhcp_server_-_iot_-_servers.png?800|}}
+<WRAP info>
+**NOTE:**  Change DNS providers as required.
+</WRAP>
+----
+===== Configure DHCP for the GUEST Interface =====
+Navigate to **Services -> DHCP Server**.
+Select **CLEAR** tab and set the DHCP server as follows:
+  * Enabled:  **Checked**.
+  * Range:
+    * From:  **192.168.99.100**.
+    * To:  **192.168.99.199**.
+<WRAP info>
+**NOTE:**  Set each interface to use x.x.x.100-199 for dynamic addresses and reserve x.x.x.10-99 for static allocations.
+Depending on the number of devices in your network adjust this to suit your needs.
+</WRAP>
+{{:pfsense:install_pfsense:pfsense_-_services_-_dhcp_-_guest.png?800|}}
+----
+Return to [[PFSense:Install pfSense|Install pfSense]] or continue to [[PFSense:Install pfSense:NTP Configuration|NTP Configuration]].
+----