Differences

This shows you the differences between two versions of the page.

--- networking:subnet_masks:introduction_to_ip_addresses_and_subnetting [2020/08/19 16:09] – 192.168.1.1
+++ networking:subnet_masks:introduction_to_ip_addresses_and_subnetting [2020/08/19 16:11] (current) – 192.168.1.1
@@ Line 40: / Line 40: @@
 |/29|32|8|5|248|
 |/30|64|4|6|252|
+----
 The next steps is to find:
@@ Line 48: / Line 50: @@
 Let's take for example 192.168.1.75/27.  Using the chart above we know there are 8 subnets with 32 addresses each.  This IP obviously cannot reside in the .32 to .63 range so it must be in the .64 to .93 range.  Hence the network address for 192.168.1.75/27 is 192.168.1.64 and the broadcast address is 192.168.1.95.
-So what's the point of all this madness?  Here's a real world example.  Say you're hired to divide up a 10.14.1.0/24 network into 20 subnets.  Each subnet represents a department in the company.  How would you do this?  From looking at the chart above, you'll need to allocate 32 subnets, which means you need to change the netmask to /29.  Each subnet will have 8 hosts which has only 5 usable addresses (You need one for network address, broadcast, and router).
+----
+===== Summary =====
+So what's the point of all this madness?
+Here's a real world example.  Say you're hired to divide up a 10.14.1.0/24 network into 20 subnets.  Each subnet represents a department in the company.  How would you do this?  From looking at the chart above, you'll need to allocate 32 subnets, which means you need to change the netmask to /29.  Each subnet will have 8 hosts which has only 5 usable addresses (You need one for network address, broadcast, and router).