Differences

This shows you the differences between two versions of the page.

--- networking:idrac:reset_password [2023/06/06 08:25] – created peter
+++ networking:idrac:reset_password [2023/06/06 08:26] (current) – peter
@@ Line 5: / Line 5: @@
 You need physical direct access.
-  - This varies by server model but the general process is to power on or reboot the server and press **F2** until you get into the BIOS/SETUP.
+) This varies by server model but the general process is to power on or reboot the server and press **F2** until you get into the BIOS/SETUP.
-  - Navigate to the iDRAC Settings -
-  - At this point you can either default everything which will restore the default **root/calvin** login information or you can go to **User Settings** and change the username and password.
+) Navigate to the iDRAC Settings -
+) At this point you can either default everything which will restore the default **root/calvin** login information or you can go to **User Settings** and change the username and password.
 <WRAP info>
@@ Line 13: / Line 15: @@
 </WRAP>
+) Save the settings, and click the **Finish** Button in iDRAC config; and then click on **Exit** to leave the BIOS and restart.
-.) Save the settings, and click the **Finish** Button in iDRAC config; and then click on **Exit** to leave the BIOS and restart.
+<WRAP info>
+**NOTE:**  After this the new password should be active and enabled.
+</WRAP>
-After this the new password should be active and enabled.
 ----
@@ Line 22: / Line 26: @@
 ===== Reset Password Did Not Work =====
-You cannot login to iDRAC still.
+You still cannot login to iDRAC.
 Make sure you did Step #4 above