Differences

This shows you the differences between two versions of the page.

--- cisco:switch:vlans [2021/02/19 11:46] – [Check that VLAN has been configured] peter
+++ cisco:switch:vlans [2021/02/19 11:52] (current) – peter
@@ Line 16: / Line 16: @@
 <code bash>
+...
+    default   active     Fa0/1, Fa0/2, Fa0/3, Fa0/4
+                          Fa0/5, Fa0/6, Fa0/7, Fa0/8
+                          Fa0/9, Fa0/10, Fa0/11, Fa0/12
+                          Fa0/13, Fa0/14, Fa0/15, Fa0/16
+                          Fa0/17, Fa0/18, Fa0/19, Fa0/20
+                          Fa0/21, Fa0/22, Fa0/23, Fa0/24
+...
 </code>
+<WRAP info>
+**NOTE:**  This shows that all 24 ports are on VLAN1.
+</WRAP>
@@ Line 51: / Line 63: @@
 <code bash>
 ...
-   VLAN0020   active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
+    default    active    Fa0/5, Fa0/6, Fa0/7, Fa0/8
+                          Fa0/9, Fa0/10, Fa0/11, Fa0/12
+                          Fa0/13, Fa0/14, Fa0/15, Fa0/16
+                          Fa0/17, Fa0/18, Fa0/19, Fa0/20
+                          Fa0/21, Fa0/22, Fa0/23, Fa0/24
+   VLAN0020   active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
 ...
 </code>
+<WRAP info>
+**NOTE:**  This shows that ports 1-4 are now on VLAN50.
+</WRAP>
 ----